ITD's Metal Tokens

Customized & stock tokens

You can get an online-quote for ANY combination of the standard parameter settings (diameter, thickness and metal alloy) described below.

Making your choice among our wide range of die-cutter diameters, required thickness and immediately available metal alloys, will enable you to use the on-line quote calculator tool.

If you absolutely prefer tokens in other dimensions or materials,
we'll  try to give you a quote if you provide us with all information
by filling out the email quote form. 

Read on below to know all there is to know about :

Our range of standard diameters (in mm) : (general tolerance of 0,05mm)

18,50 - 21,55 22,00 - 23,50 24,00 - 25,50 26,00 - 27,75 28,00 - 30,40 30,60 - 32,00
18,50 22,00 24,00 26,00 28,00 30,60
19,00 22,30 24,30 26,30 28,20 31,00
20,00 23,00 24,50 26,50 28,40 32,00
21,00 23,30 24,75 26,75 29,00  
21,20 23,50 25,00 27,00 30,00  
21,35   25,50 27,25 30,40  
21,55     27,75    
 

Take into account : 1 inch = 25,4 mm / 10 mm = 0,3937 inches

back to top

Our standard thicknesses : (general tolerance of 0,08mm)

Regular thickness is 1,75mm (1,50 / 2,00 / 2,25mm also available)

back to top

Our set of metal alloys :
  

Code Composition (Alloy) Color Available Thickness
(in mm)
1,50 1,75 2,00 2,25 2,75
MS63 Cu 63% - Zn 37% Gold x x x x x
MS63 NICKLE Cu 63% - Zn 37% + nickle layer Silver x x x x x
MS70 Cu 70% - Zn 30% Gold - x x - -
MS70 NICKLE Cu 70% - Zn 30% + nickle layer Silver - x x - -
ALPACA 6% Cu 70% - Zn 24% - Ni 6% Gold - x x x -
ALPACA 12% Cu 64% - Zn 24% - Ni 12% Silver x x x x x
ALPACA 18% Cu 62% - Zn 20% - Ni 18% Silver - x - - -
NICLAL 725 Cu 89% - Sn 9% - Ni 2% Silver-Pink - x - - -
92/6/2 Cu 92% - Al 6% - Ni 2% Gold-Bronze - x - - -
RED COPPER Cu 100% Rood - x x x -
INOX Stainless Steel Silver On Demand

  Pure gold is possible but we'll charge a supplement

* Others on request - fill out the form for an e-mail quote

back to top

Our standard dies (matrices) :

We have several standard-designs you can use for your tokens without any die-charge :

design 1
  		 design 2
  		 design 3
 
design 4 design 5

back to top

Customized design dies (matrices) :

Provide us with a picture, any design or just an idea by fax or attached (graphic) file by email : our graphic department will then start the cad/cam job and in less than 2 working days  we’ll present to you a “good for approval”-image of your very own personalized token.

All lay-out work is free of charge and the die manufacturing charge is quite moderate :

ONLY 200 EURO per side
( free for consecutive order with same diameter)

A combination of 1 customized side and 1 standard image is possible.

back to top